Z-wave Range Extenders amplify the range of your Wi-Fi. Networks are an essential part of today’s living, and for that reason, not many things can be as annoying as poor networks. One of the ways to overcome poor network connectivity is by using range extenders. Take a look at some of the best Z-Wave range extenders out there.
voice control – alexa & google assistant compatible (requires a z-wave certified hub). works with the following z-wave certified hubs: smartthings, ring alarm, wink, adt pulse, adt command, trane, vivian, nexia, honeywell, home seer, harmony home hub extender, vera and more.
advanced design 2nd generation model – improved components reduced the housing depth by up to 20% compared to previous z-wave models and eliminated the need for heat tabs. quick fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
versatile applications – control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual on/off operation from the switch. home automation is simple through custom scenes, personalized scheduling and convenient alerts. the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. up to four add-on switches can be connected to the same device.
full-home coverage - z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network. the switch is capable of controlling indoor or outdoor fixtures for whole-home automation = and repeats your z-wave signal from your hub or other devices to extend your range by up to 150ft. extended signal range increases your home automation coverage to enhance your control.
easy installation – requires indoor in-wall installation with hardwired connections. neutral wire required. includes white and light almond paddles (wall plate not included). works with all led, cfl, incandescent and halogen bulbs as well as other devices. operating temperature range 32-104 degrees fahrenheit.
more z-wave coverage than ever: extends z-wave range by more than 400 ft in all six directions. great for basements, garages, or attics. z-wave hub required, this is not a standalone product. will extend signal for any open z-wave system (not supported by z-wave alarm panels), once you add it, it's working, even if it displays as unknown or other.
extend signal to the backyard: it comes with a suction cup mount for window installation to help coverage outside of your home.
flexible mount: plug it into a standard receptacle for a quick and clean set-up (doesn't block the other outlet) or use the micro usb port to mount the extender at the location of your choice (cable or power adapted not included).
smart led indicator: you can use the dome range extender as a nightlight. great for dark hallways, basements, breezeways or bathrooms. use it as a notification indicator for other things happening in your network (turn it on automatically whenever the garage door is open).
reliable solution: the product is etl listed and complies with all north american safety standards. it's backed by a 12-month manufacturer warranty.
voice control – alexa & google assistant compatible (requires a z-wave certified hub). works with the following z-wave certified hubs: smartthings, ring alarm, wink, adt pulse, adt command, trane, vivint, nexia, honeywell, homeseer, vera and more.
hassle-free operation – control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual on/off operation from the switch. home automation is simple through custom scenes, versatile scheduling and convenient alerts.
single outlet – use one grounded z-wave controlled outlet to wirelessly schedule and operate a lamp or small appliance from anywhere at any time with a mobile device.
full-home coverage – z-wave plus works with all previous z-wave generations to allow continued expansion of your smart-home network. the switch is capable of controlling indoor fixtures for whole-home automation.
easy installation – no wiring required. simply plug in the device and connect to your hub for convienient on/off functions. space-efficient design leaves the second outlet free for continued use and easily fits behind furniture. works with all led, cfl, incandescent and halogen bulbs as well as other devices. operating temperature range 32-104 degrees fahrenheit.
wireless z-wave signal repeater: amplifies and repeats weak signals. boost the wireless range up to 250% and raise the reliability of weak z-wave / z-wave plus devices.
50% faster z-wave communication: built upon aeotec unique gen7 hardware and firmware stack, range extender 7 communicates with other z-wave devices up to 50% faster than other repeater models.
s2 compatible: security focussed, range extender 7 can repeat and amplify security 2 (s2) compatible z-wave communication used by door locks, alarm systems, and other secure devices.
easy as plug and play: plug it in (its small design means it doesn’t block other sockets) and then connect it to your z-wave gateway using range extender 7’s smartstart qr code. it’s aeotec simplest installation yet.
compatible with all z-wave gateways including isy994i, homeseer hs3, vera, smartthings, wink, hubitat, domoticz, jeedom, open-zwave. built upon aeotec’s gen7 technology. z-wave plus v2 and 700 series certified. certification number: zc12-19080007.
Aeotec Z-wave plus is a 2-in-1 wireless network repeater and range extender. It has a small design and is compatible with Z-wave and Z-wave plus outlets.
Wireless network repeater
The signal indicator allows you to know the strength of the signal.
Simple plug and play system allows for easy installation.
Offices and homes have dead spots where Wi-Fi networks might not reach. You don’t want to stay up at night while you are supposed to be lying on your bed because you want to be connected to Wi-Fi. While extenders can spread the reach of your Wi-Fi connection, you don’t want to get an extender that is a bad fit. It will make the problem twice as bad. You also want to make sure that your router isn’t a problem. If you run a smart home, you want to choose a Wi-Fi extender that will support your smart home. To choose the perfect range extender, here are a few things to consider.
1. Wi-Fi standard
When buying range extenders, you need to consider the type of Wi-Fi you want to use with the range extender or repeater. There are different types of Wi-Fi routers and each is compatible with a certain type of range extender. If you have an old version router, it is necessary to ensure you pick up a range extender that matches with the router.
2. Frequency Bands
Look out for the frequency of your router before buying the range extender. There are generally two types of Bands. 2.4GHz and 5GHz. Recent range extenders can fit in with both bands but it will be better to buy a range extender that fits perfectly with your router to avoid issues.
3. Ethernet Ports
If your job thrives on a consistent internet connection, you might want to consider having a wired setup run your daily browsing needs. That is the only way you are sure of the data connection you are getting. Some range extenders come with these ports and can be a safe option when the weather condition seems to toil with your Wi-Fi connection. Having a viable alternative will help you to continue with your work or fun without much hindrance.
4. USB Ports and Audio Jacks
If you are looking to have a central printer for your business, you can buy a range extender with USB ports that can be connected to the range extender. If you also want to play music with your range extender, you can go for those with audio jacks.
Frequently Asked Question
Is it any range extender that will work with my router?
Yes. Any range extender can work with any of that because they are generally made for them
How can I be sure of the compatibility of my router with the range extender?
You can check the compatibility of the router with the range extender by making sure of the band with which the range extender comes. There are generally two types of band with 2.4 and 5 GHz but it is important that you know that most routers can work with any of those so any range-extender you get should be able to work with your router irrespective of the bandwidth in which it is operating on.
Where should I place my range extender?
Ideally, the range extender should be placed in between the router and the computer however given the setting or the use maybe like if it is for a general house use, the range extender should be placed within the wireless range of the router so that I can be able to extend the range properly.
What do I do if I am having problems logging into my range extender?
If you are having problems logging into your wireless range extender the next thing to do is to troubleshoot the range extender. The instruction for troubleshooting the range extender should be found on the manual of the range extender. If the instruction is not on the manual or you are still having problems after troubleshooting your range extender you should contact an expert.
How do I set up my wireless range extender?
Instructions on how to set up your wireless range extender can be found on the manual included with the range extender. In case you are having problems contact your distributor or an expert.
Z-wave range extenders are designed for homes and offices. It should however be noted that no matter the number of range extenders, it would only extend the range of present connection. If the connection from your internet service provider is weak, the range extender would not improve it.